Vector Typhoon is built on high strength steel frame to sustain over 10.000 Watt peak power and 80+ km/h top speed! With zero maintenance needed and over 100 km range this bike will never limit your fun - only you decide when and where to ride next!
(for EU clients 19% VAT will apply)
Vector Typhoon is designed for trails, off-road riding, forests or fields where you want to experience impressive 10.000 Watt of power output. The motor is located in the center of rear wheel and provides torque without any chain or belt - right where you need it! Due to this design we managed to make the bike completely silent, thus making it possible to ride in any locations where loud dirt bikes and high noise mid-drive bikes are not allowed! Thanks to its bicycle look and pedals you can ride without attracting extra attention!
Three motor options are available: high-torque, average torque and speed, and high-speed model - depending on your riding style and location! For slower rides in high hills and mountains high torque motors are better choice, and for fast riding on low hills high RPM motor will bring more performance. Bike can reach over 80 km/h top-speed and stay stable due to low center of gravity and stiff frame. Sin wave speed controller is located under the frame for better air cooling under high load. Battery is located inside the frame and is protected in case of fall with set of side covers and strong metal case. It can provide enough current for peak power in any state of charge!
Tubular design of the frame was constructed with X3 load potential to make sure it can go through the hardest terrain. Every frame is tested with 9 kN load on a seat point, and 10 kN twist force oh a head tube! From clients feedback we know this bike can survive any jumps, falls, and even collision with car! Compared to other brands of frames from metal sheets, Typhoon frame has greater stiffness. In case of break or scratched, side covers can be replaced within few minutes (as they don’t carry any structural load and are made out of light and inexpensive material). Your bike will always look like new, even after years of riding! Chassis and rear swingarm are made out of high-grade, high-tensile steel. All stressed parts are FEM analyzed and tested. Frame is painted with powder coating and is well protected against the water, so rain, snow or ice won’t stop you.
Due to hub motor, Typhoon engages regenerative braking every time you touch the brake-lever. You can set the level of braking force, or turn it off completely. Bike is also equipped with best in class double calipers front braking system and 4 piston hydraulic rear brake for superb braking performance! Regenerative braking with powerful hydraulic brakes gives you maximum control in any situation!
Typhoon is very energy efficient bike suitable for long-distance rides. On a single charge you can make over 200 km without pedalling, with average speed of 35 km/h. You can also pedal it as any other e-bike, or even turn off the motor completely and ride it as non-electric bicycle, if necessary! The battery can be re-charged from 0 to 100 percent in 120 minutes – from a standard outlet.
State of the art battery consists of 300 separate Li-Ion cells, providing the best price/capacity/discharge current ratio. With a weight of only 14.9 kg/34 lbs it provides 3.8 kWh of energy - enough to charge your smartphone battery over 200 times! Due to smart Battery Management System (BMS) the battery can handle more than 600 charging cycles before it loses only 20% of its initial capacity. And 600 cycles are equivalent to 60.000 km! The battery can be replaced. The BMS system keeps tracking every cell and checks voltage, current and temperature. It protects battery from overcharging, overdischarging, short cirquits, overheating, and can balance the cells when it is needed! Each battery goes through series of tests and is checked for overcharging/discharging protection as well as vibration testing before being installed on the bike!
Power-modes: 3 power modes switch (Reverce, Eco, Boost) with speed limitation, can be programmed Max power: 10.000 Watt+ Max speed: 80 kmh+ / 50 mph+ Eco-mode top-speed: 25 km/h for EU Range: 200 km+ / 120 mi+ (average speed of 25 km/h, without pedalling) Battery capacity: 3.8 kWh Battery voltage: 72v nominal Weight: 59 kg Charge time: 150 min
Motor: Custom motor 50m m Neodymium magnets 16 poles, 400-800 rpm Controller: Custom Kelly 7230s, 300 Amps Fork: Custom V crown DNM USD 8 Coil, 200 mm travel Rear shock: 650/850 lbs spring, 240 mm DNM Burner 2S Brakes front: Custom hydraulic Tektro Auriga dual calipers, 4piston, 203 mm rotors Brakes rear: Custom hydraulic Tektro Auriga 4 piston, 203 mm rotor
Front: 24” double wall aluminium rim, or 19”aluminium moto rim
Vector Electric Bikes were designed from scratch as a no-compromise solution for those who want speed, power, and comfort all in one e-bike! Located in Munich, the company was established in 2013 with main focus on new technologies and solutions for electric vehicles.
Polywarm Deutschland GmbH, Office156, Hansastrasse 18, 80686 Munich, Germany