The Vector is designed from the scratch as non compromise solution for those who want speed, power, comfort all in one ebike!
We have spent thousands hours on developing our ebikes taking into account thoughts of more than 100 test riders over two years! The final point was to create ebike that will bring feeling of satisfaction every time you ride it!
We know that your local law can limit your maximum speed and power to ride legally. For this case we developed 3 positioning switch that can be set to exact speed and power limitation you need! Still, as only you need more speed all you need to do is to tap the switch into another position.
No more sweating riding to work!
You can pedal, use pedal assist system and led the engine help you as much as you set it, or you can use twist throttle and ride Vector like a motorcycle. With a maximum speed of 45kph/28 mph you can get anywhere faster!
You can reach up to 80km/50mi of range with a single charge with average speed of 35kph/22mph.
Vector ebike equipped with regenerative braking, it will charge your battery every time you braking and save your braking pads.
Hydraulic brakes with 203 mm rotors provide maximum stopping-power on your demand.
Range of travel is no more an issue. The Vector can be re-charged from 0 to 100 percent in 60 minutes – from a standard 110V / 220V outlet.
A battery consists of separate Li-Ion Panasonic 18650 PF cells, providing the best weight/capacity/discharge current ratio. With a weight of only 14.9kg/34lbs it is providing 2,5 kWh of energy!
The battery can handle more than 600 charging that in average takes 3-4 years. The battery can be replaced by the new one.
The BMS system keeps tracking every cell and checks voltage, current and temperature. You can see all this parameters in real-time on your screen. The BMS monitors 5 temperatures within the battery. We have spent years on the development of this system in order to guarantee a long battery-life.
The frame where constructed to operate equally good in a city and forest off-road.
The chassis and rear swingarm are made out of high-grade, high-tensile steel. All stressed-parts are FEM analyzed and stress-tested on benches. Hand-laminated aluminium composite panel structure is used for the body covers.
Eco-mode power: 250 Watt with PAS only for EU (you can ride in this mode like standard street legal e-bike)
Capacity: 2.5 kWh
High strength steel tubes
Motor: direct drive with Neodymium magnets
DNM USD-8 Double crown 200mm travel
|Rear suspension||Burner 3 650lbs/850lbs spring|
24” front double wall rim, aluminium
Seatpost: 31, 6 mm
Copyright 2017. Vector. All Right reserved.